*The store has not been updated recently. You may want to contact the merchant to confirm the availability of the product.
2pcs 0.6mm Diameter HRC55 CNC Mirco Grain Carbuye Endmill 2-Flute End MillsProduct DescriptionProduction ConditionBrand NewProduction NameCNC EndMillModel Number0.6mmShippingFreeSpecification:Finishing: aluminum titanium coating (TIALN)Workpiece hardness: 55 degrees or lessKey Features:Taiwan Chun Bao WF40 ultrafine particles carbuye rods, ultrafine particles of tungsten steel base material with high wear resistance and strength, the blade-coated black (TIALN) high aluminum titanium coating to achieve a tool high heat resistance and wear life has been greatly improved. Dedicated to high-speed M / C speed cutting of high hardness, heat treatment mold can be processed directly to the finishing flat cutter blade 2 to the main groove milling. A wide range, reducing the number of tool changes, improve machine utilization rate, saving production time away. Specially designed blade slot, milling large chip evacuation, with a strong cutting chip discharge more fluid, easy to stick the knife, so that the workpiece is more shiny. Small diameter and more to meet the special requirements of the workpiece machining!Applicable Materials: carbon steel, tool steel, alloy steel, tool steel, quenched and tempered steel, cast iron, stainless steel, welding steelNote: When endmill hangs out too long, leads to vibration, so to reduce motor spin speed and feed rate. According to the amount of depth of cut, tool steel and other usage, rationalize the spin speed and feed rate.[sage Tool Tips]In order to get better the cutting surface and extend tool life. Be sure to use high-precision, high rigidity, good balancing of the tool holder.1. Before using this tool, please measurement tool deflection, tool deflection accuracy exceeds 0.01MM, please correct before cutting.2. The tool extends the length of the chuck as short as possible, the tool extends the amount of time longer if extended, please cut their own speed, feed rate or cutting the amount.3. If the cutting of abnormal vibration or sound, cut spindle speed and depth of cut to improve the situation so far.4. The steel material was cooled in a spray or jet is the best way to apply, so that high aluminum titanium play the best results. Stainless steel, titanium alloy or heat resistant alloy recommend the use of non-water-soluble cutting fluid.5. The cutting mode according to the workpiece, the machine, the impact of the software, the above data for reference only, to be in stable condition after cutting the feed rate up by 30% to 50%.Package100% Brand New, Package includes the follow items:d=0.6mm; C=1.2mm; D=4.0mm; L = 50mm; x 2pcTotal 2pcs endmills.whered is the diameter of endmill tip,C is the length of the endmill blade,D is the diameter of endmill tail,L is the total length of endmill.Package and Shipping InformationPacking: bubble wrap + cartonSize: Weight: Est. 100gShipping: Item will be shipped within 2 working days after full payment is received. Tracking number will be uploaded to eCRATER. We will ship with tracking number for all purchase over USD10. You should receive item within 2 to 4 weeks. Please send Email to us if the parcel was not delivered after 30 days of purchase. We will follow the shipment until the parcel is delivered.